Essential kit for applying crystals to outside swooshes on Nike shoes*
*Shoes as shown in the picture, please note Air Force 1s require more crystals for a larger surface area.
220 Preciosa Crystals (see sizes below)
Crystal Pick Up Pencil
Plastic Crystal Sorting Tray
Clear and AB options:
SS5 x 20 PCS
SS7 x 40 PCS
SS9 x 40 PCS
SS12 x 20 PCS
SS16 x 100 PCS
SHOES NOT INCLUDED
E6000 GLUE INSTRUCTIONS
E6000 is the worlds leading industrial strength adhesive. It provides a superior bond between practically any two surfaces. Use this glue to attach crystals to almost any surface. Once cured, it is waterproof and virtually impossible to break.
Follow these step-by-step directions when using E6000 Craft:
We recommend you read all directions and perform a small test before use. 1. Surfaces should be clean, dry and free of dirt. For best results on non-fabric items, roughen surface slightly before use. 2. Puncture seal in neck of tube using pointer cap. Application temperature 10 to 32 °C (50 to 90 °F) 3. Apply directly to the surfaces to be bonded or repaired. 4. Allow around 24 hours minimum to curing but preferably 72 hours. 5. Apply a thin coat of petroleum jelly to the thread of the tube before replacing the cap. 6. Uncured adhesive can be cleaned off with acetone or citrus-based solvents.
Note: E6000 is not recommended for use on styrofoam, polystyrene, polyethylene or polypropylene plastics. NOT SUITABLE FOR NAIL ART AS IT TAKES 24 HOURS TO FULLY CURE.