Ceralun is a high-performance, two-part ceramic epoxy clay developed by Swarovski for the application of Swarovski crystals (both foiled and unfoiled). It is a flexible material and a perfect adhesive for jewelry making, watches and interiors.
Size: 20g
Use with Swarovski Article 1028, Chaton Round Stones
HOW TO USE CERALUN
Workspace Prep:
Use a clean, lint-free surface in a space with good lighting and ventilation.
Plan Ahead:
Decide on your design before starting your project. Have accessory tools ready, we recommend a wax applicator tool or tweezers, a toothpick, and gloves.
Mixing Ceralun:
Wear gloves. Mix equal parts of Ceralun Part 1 and 2 until fully blended (no marbling). Use only what you need—once mixed, it should last around 2 hours at room temp.
Applying Crystals or other decorations:
Use a wax tool or tweezers. Start with the largest pieces first, pressing crystals/decorations firmly into the clay. Clean any excess clay with a toothpick.
Finishing:
Clean off any unwanted clay from the surface before curing. Let your finished piece cure overnight in a covered container. Wipe crystals after curing to remove residue if you have used a wax applicator tool.
Tip:
To extend the workable life of the mixed Ceralun, seal it in a zipper bag and freeze for up to 24 hours.